:SYSTem:COMMunicate:LAN:DNS?
Description
Sets or queries the Domain Name Service (DNS) address.
Parameter
Name Type Range Default
<dns> ASCII string Refer to
Remarks
-
Remarks
• The command is valid only when Manual IP is enabled
(
:SYSTem:COMMunicate:LAN:MANualip[:STATe]
).
• The format of <dns> is nnn.nnn.nnn.nnn; wherein, the first nnn ranges from 1
to 223 (except 127), and the other three range from 0 to 255.
• It is recommended that you acquire a valid address from your network
administrator.
• After sending the command, execute
:SYSTem:COMMunicate:LAN:APPLy
to
apply the network parameters currently set.
Return Format
The query returns the DNS address, for example, 172.16.3.2.
Examples
:SYST:COMM:LAN:DNS 172.16.3.2 /*Sets the DNS address to
172.16.3.2.*/
:SYST:COMM:LAN:DNS? /*Queries the current DNS address. The query
returns 172.16.3.2.*/
4.11.5.5 :SYSTem:COMMunicate:LAN:IPADdress
Syntax
:SYSTem:COMMunicate:LAN:IPADdress <
ip
>
:SYSTem:COMMunicate:LAN:IPADdress?
Description
Sets or queries the IP address.
Command System
82
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
Need help?
General
