Rigol DP2000 Series - Tst; Wai

Parameter
None.
Remarks
• This command is only applicable to the trigger system that has “BUS (software)
trigger” as its trigger source.
• When "Bus (software) trigger" is selected, sending this command will trigger the
power supply and generate a trigger after the specified delay time.
Return Format
None.
Examples
*TRG /*Generates an event trigger.*/
4.3.14 *TST?
Syntax
*TST?
Description
Queries the self-test result of the instrument.
Parameter
None.
Remarks
The power supply performs a power-on self-test. This commands queries the self-test
result.
Return Format
Queries the result of the self-test that the instrument performed. The query returns
+0 if it passes and +1 if it fails.
Examples
None.
4.3.15 *WAI
Syntax
*WAI
Command System
30
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.