Rigol DSA832E - Mmemory Subsystem; Mmemory:delete

RIGOL Chapter 2 Command System
2-78 DSA800E Programming Guide
:MMEMory Subsystem
Command List:
 :MMEMory:DELete
 :MMEMory:DISK:INFormation?
 :MMEMory:LOAD:CORRection
 :MMEMory:LOAD:LIMit
 :MMEMory:LOAD:MTABle
 :MMEMory:LOAD:SETUp
 :MMEMory:LOAD:STATe
 :MMEMory:LOAD:TRACe
 :MMEMory:MOVE
 :MMEMory:STORe:CORRection
 :MMEMory:STORe:LIMit
 :MMEMory:STORe:MTABle
 :MMEMory:STORe:PTABle
 :MMEMory:STORe:RESults
 :MMEMory:STORe:SCReen
 :MMEMory:STORe:SETUp
 :MMEMory:STORe:STATe
 :MMEMory:STORe:TRACe
:MMEMory:DELete
Syntax
:MMEMory:DELete <file_name>
Description
Delete the file with the specified filename.
Parameter
Name
Type
Range
Default
<file_name>
ASCII String
--
--
Explanation
<file_name> should contain the path and the filename; for example, E:\Rigol\Trace1.trc.
This operation fails if the file with the specified filename does not exist.
Example
The command below deletes the Trace1.trc file under the Rigol folder in the USB storage device.
:MMEMory:DELete E:\Rigol\Trace1.trc