Rigol DSA832E Programming Guide

RIGOL Chapter 2 Command System
2-16 DSA800E Programming Guide
:CALCulate:MARKer<n>:MAXimum:MAX
Syntax
:CALCulate:MARKer<n>:MAXimum:MAX
Description
Execute a peak search according to the search mode set by
the
:CALCulate:MARKer<n>:PEAK:SEARch:MODE command and mark the peak using the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4
--
Example
The command below executes a peak search and marks the peak using marker 2.
:CALCulate:MARKer2:MAXimum:MAX
:CALCulate:MARKer<n>:MAXimum:NEXT
Syntax
:CALCulate:MARKer<n>:MAXimum:NEXT
Description
Search and mark the peak whose amplitude is closest to that of the current peak and which meets the peak
search condition.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4
--
Explanation
When no peak is found, "No peak found" is displayed on the screen.
:CALCulate:MARKer<n>:MAXimum:RIGHt
Syntax
:CALCulate:MARKer<n>:MAXimum:RIGHt
Description
Search and mark the nearest peak which is located at the right side of the current peak and meets the peak
search condition.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4
--
Explanation
When no peak is found, "No peak found" is displayed on the screen.

Rigol DSA832E Specifications

General

Brand	Rigol
Model	DSA832E
Category	Measuring Instruments
Language	English