Rigol DSA832E

RIGOL Chapter 2 Command System
2-62 DSA800E Programming Guide
:FETCh:TOIntercept:IP3?
Syntax
:FETCh:TOIntercept:IP3?
Description
Query the minor one of the intercepts of the Third Order Lower and the Third Order Upper.
Explanation
This command is only available when the TOI measurement is enabled.
This command will select data from the latest measurement results and transmit the data to the output
buffer.
Return Format
The query returns the minor one in scientific notation.
Example
The query below returns -8.131735E+01.
:FETCh:TOIntercept:IP3?
:FETCh:TPOWer?
Syntax
:FETCh:TPOWer?
Description
Query the result of T-power measurement.
Explanation
This command is only available when the T-power measurement is enabled.
The power unit of the return value is the same with the current Y-axis unit.
This command will select data from the latest measurement results and transmit the data to the output
buffer.
Return Format
The query returns the T-power measurement result in scientific notation.
Example
The query below returns -1.658941E+01.
:FETCh:TPOWer?