Rigol DSA832E

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-55
:FETCh:CNRatio:CARRier?
Syntax
:FETCh:CNRatio:CARRier?
Description
Query the carrier power.
Explanation
This command is only available when the C/N ratio measurement is enabled.
The power unit of the return value is the same with the current Y-axis unit.
This command will select data from the latest measurement results and transmit the data to the output
buffer.
Return Format
The query returns the carrier power in scientific notation.
Example
The query below returns -1.484203E+01.
:FETCh:CNRatio:CARRier?
:FETCh:CNRatio:CNRatio?
Syntax
:FETCh:CNRatio:CNRatio?
Description
Query the C/N ratio.
Explanation
This command is only available when the C/N ratio measurement is enabled.
This command will select data from the latest measurement results and transmit the data to the output
buffer.
Return Format
The query returns the C/N ratio in scientific notation.
Example
The query below returns 8.956909E-02.
:FETCh:CNRatio:CNRatio?