Rigol DSA832E - Display:msgswitch:state; Display:ukey:state

RIGOL Chapter 2 Command System
2-44 DSA800E Programming Guide
:DISPlay:MSGswitch:STATe
Syntax
:DISPlay:MSGswitch:STATe OFF|ON|0|1
:DISPlay:MSGswitch:STATe?
Description
Enable or disable the message display.
Query the status of message display.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
ON|1
Return Format
The query returns 0 or 1.
Example
The command below disables the message display.
:DISPlay:MSGswitch:STATe OFF or :DISPlay:MSGswitch:STATe 0
The query below returns 0.
:DISPlay:MSGswitch:STATe?
:DISPlay:UKEY:STATe
Syntax
:DISPlay:UKEY:STATe OFF|ON|0|1
:DISPlay:UKEY:STATe?
Description
Enable or disable the display of the UserKey definition in the user interface.
Query whether the UserKey definition is displayed in the user interface.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
ON|1
Return Format
The query returns 0 or 1.
Example
The command below enables the display of the UserKey definition in the user interface.
:DISPlay:UKEY:STATe ON or :DISPlay:UKEY:STATe 1
The query below returns 1.
:DISPlay:UKEY:STATe?