Rigol DSA832E - Mmemory:store:results; Mmemory:store:screen

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-85
:MMEMory:STORe:RESults
Syntax
:MMEMory:STORe:RESults <file_name>
Description
Save the current measurement results in the USB storage device with the specified filename (.csv).
Parameter
Name
Type
Range
Default
<file_name>
ASCII String
--
--
Explanation
<file_name> should contain the path and the filename.
If the specified file already exists, it will be overwritten.
Example
The command below stores the current measurement results in the USB storage device with the filename
ACP.csv.
:MMEMory:STORe:RESults E:\ACP.csv
:MMEMory:STORe:SCReen
Syntax
:MMEMory:STORe:SCReen <file_name>
Description
Save the current screen image in the USB storage device with the specified filename (.bmp).
Parameter
Name
Type
Range
Default
<file_name>
ASCII String
--
--
Explanation
<file_name> should contain the path and the filename.
If the specified file already exists, it will be overwritten.
Example
The command below stores the current screen image in the USB storage device with the filename
screen.bmp.
:MMEMory:STORe:SCReen E:\screen.bmp