Rigol DSA832E Programming Guide

RIGOL Chapter 2 Command System
2-36 DSA800E Programming Guide
:CONFigure Subsystem
Command List:
 :CONFigure?
 :CONFigure:ACPower
*
 :CONFigure:CHPower*
 :CONFigure:CNRatio*
 :CONFigure:EBWidth*
 :CONFigure:HDISt*
 :CONFigure:OBWidth*
 :CONFigure:PF
 :CONFigure:SANalyzer
*
 :CONFigure:TOI*
 :CONFigure:TPOWer*
Explanation:
Commands marked with "*" are only available for DSA800E installed with the advanced measurement kit
(option).
:CONFigure?
Syntax
:CONFigure?
Description
Query the current measurement function.
Return Format
The query returns OFF, TPOW, ACP, CHP, OBW, EBW, CNR, HD, TOI or PF.
:CONFigure:ACPower
Syntax
:CONFigure:ACPower
Description
Set the spectrum analyzer to the adjacent channel power measurement state.
Explanation
This command stops the current measurement and sets the instrument to the default state of the specified
measurement.
When any of the measurement settings is changed, use the
:READ command to initialize the measurement
without restoring it to the default value.

Rigol DSA832E Specifications

General

Brand	Rigol
Model	DSA832E
Category	Measuring Instruments
Language	English