Rigol DSA832E

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-39
:CONFigure:TOI
Syntax
:CONFigure:TOI
Description
Set the spectrum analyzer to the TOI measurement state.
Explanation
This command stops the current measurement and sets the instrument to the default state of the specified
measurement.
When any of the measurement settings is changed, use the
:READ command to initialize the measurement
without restoring it to the default value.
:CONFigure:TPOWer
Syntax
:CONFigure:TPOWer
Description
Set the spectrum analyzer to the T-power measurement state.
Explanation
This command stops the current measurement and sets the instrument to the default state of the specified
measurement.
When any of the measurement settings is changed, use the
:READ command to initialize the measurement
without restoring it to the default value.