Chapter 1 SCPI Overview RIGOL
DSA800E Programming Guide 1-1
Chapter 1 SCPI Overview
SCPI (Standard Commands for Programmable Instruments) is standardized instrument programming
language that is based on the standard IEEE488.1 and IEEE 488.2 and conforms to various stardards (such
as the floating point operation rule in IEEE754 stardard, ISO646 7-bit coded character for information
interchange (equivalent to ASCll programming).
Main topics of this chapter:
Syntax
Symbol Description
Parameter Type
Command Abbreviation
To Next Page
Loading...
Need help?
General
