Rigol DSA832E Programming Guide

RIGOL Chapter 2 Command System
2-10 DSA800E Programming Guide
:CALCulate:LLINe<n>:RELFreq[:STATe]
Syntax
:CALCulate:LLINe<n>:RELFreq[:STATe] OFF|ON|0|1
:CALCulate:LLINe<n>:RELFreq?
Description
Enable or disable the REL Frequency.
Query the status of the REL Frequency.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
--
--
Bool
OFF|ON|0|1
OFF|0
Explanation
<n> denotes the lower limit line (1) or upper limit line (2).
When the REL Frequency is enabled, the frequency set is the difference between the frequency of the
current point and the current center frequency.
Return Format
The query returns 0 or 1.
Example
The command below enables the REL Frequency.
:CALCulate:LLINe1:RELFreq:STATe ON or :CALCulate:LLINe1:RELFreq:STATe 1
The query below returns 1.
:CALCulate:LLINe1:RELFreq?
:CALCulate:LLINe<n>:STATe
Syntax
:CALCulate:LLINe<n>:STATe OFF|ON|0|1
:CALCulate:LLINe<n>:STATe?
Description
Enable or disable the upper/lower limit line.
Query the status of the limit lines.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2
--
--
Bool
OFF|ON|0|1
OFF|0
Explanation
<n> denotes the lower limit line (1) or upper limit line (2).
Return Format
The query returns 0 or 1.

Rigol DSA832E Specifications

General

Brand	Rigol
Model	DSA832E
Category	Measuring Instruments
Language	English