Chapter 3 Programming Demos RIGOL
DSA800E Programming Guide 3-1
Chapter 3 Programming Demos
This chapter lists some programming demos to illustrate how to use commands to realize the common
functions of the spectrum analyzer in the development environments of Visual C++ 6.0, Visual Basic 6.0
and LabVIEW 8.6 as well as the programming demo to illustrate how to control the spectrum analyzer to
realize the common functions in Linux operation system. All the demos are based on NI (National
Instrument)-VISA (Virtual Instrument Software Architecture).
NI-VISA (National Instrument-Virtual Instrument Software Architecture) is an API (application programming
interface) written by NI based on VISA standards. You can use NI-VISA to realize the communication
between the spectrum analyzer and the PC via instrument buses such as USB. As VISA has defined a set of
software commands, users can control the instrument without understanding the working state of the
interface bus. For more details, please refer to the NI-VISA Help.
Main topics of this chapter:
Programming Instructions
Programming Preparations
Visual C++ 6.0 Programming Demo
Visual Basic 6.0 Programming Demo
LabVIEW 8.6 Programming Demo
Linux Programming Demo
To Next Page
Loading...
Need help?
General
