Rigol DSA832E

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-127
[:SENSe]:FREQuency:CENTer:DOWN
Syntax
[:SENSe]:FREQuency:CENTer:DOWN
Description
Decrease the center frequency at the center frequency step.
[:SENSe]:FREQuency:CENTer:SET:STEP
Syntax
[:SENSe]:FREQuency:CENTer:SET:STEP
Description
Set the CF step to the current center frequency.
[:SENSe]:FREQuency:CENTer:STEP:AUTO
Syntax
[:SENSe]:FREQuency:CENTer:STEP:AUTO OFF|ON|0|1
[:SENSe]:FREQuency:CENTer:STEP:AUTO?
Description
Enable or disable the auto setting mode of the CF step.
Query the status of the auto setting mode of the CF step.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
ON|1
Return Format
The query returns 0 or 1.
Example
The command below enables the auto setting mode.
:SENSe:FREQuency:CENTer:STEP:AUTO ON or :SENSe:FREQuency:CENTer:STEP:AUTO 1
The query below returns 1.
:SENSe:FREQuency:CENTer:STEP:AUTO?