Rigol DSA832E - Trace<N>:Average:type

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-187
:TRACe<n>:AVERage:TYPE
Syntax
:TRACe<n>:AVERage:TYPE VIDeo|RMS
:TRACe<n>:AVERage:TYPE?
Description
Set the average type of the trace.
Query the average type of the trace.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3
--
--
Keyword
VIDeo|RMS
VIDeo
Explanation
VIDeo: video average
RMS: power average
When the Pass/Fail test is enabled, both the :TRACe2:AVERage:TYPE? command
and :TRACe3:AVERage:TYPE? command return ERR.
When VSWR measurement is enabled, the :TRACe1:AVERage:TYPE?
command, :TRACe2:AVERage:TYPE? command and :TRACe3:AVERage:TYPE? command all return
ERR.
Return Format
The query returns VID or RMS.
Example
The command below sets the average type of trace 1 to video average.
:TRACe1:AVERage:TYPE VIDeo
The query below returns VID.
:TRACe1:AVERage:TYPE?