Rigol DSA832E Programming Guide

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-155
:STATus Subsystem
The :STATus command system and
IEEE 488.2 Common Commands are used to operate and query the
status registers. The structure of the status registers, including Questionable Status Register, Operation
Status Register, Standard Event Status Register, Status Byte Register and Error Queue, is shown below.
The :STATus commands are used to set and query the Questionable Status Register and Operation Status
Register. IEEE488.2 common commands are used to operate the Standard Event Status Register and Status
Byte Register. The
:SYSTem:ERRor[:NEXT]? command is used to query and delete the error messages in
the error queue.

Rigol DSA832E Specifications

General

Brand	Rigol
Model	DSA832E
Category	Measuring Instruments
Language	English