Rigol DSA832E Programming Guide

RIGOL Chapter 2 Command System
2-56 DSA800E Programming Guide
:FETCh:CNRatio:NOISe?
Syntax
:FETCh:CNRatio:NOISe?
Description
Query the noise power.
Explanation
This command is only available when the C/N ratio measurement is enabled.
The power unit of the return value is the same with the current Y-axis unit.
This command will select data from the latest measurement results and transmit the data to the output
buffer.
Return Format
The query returns the noise power in scientific notation.
Example
The query below returns -1.442294E+01.
:FETCh:CNRatio:NOISe?
:FETCh:EBWidth?
Syntax
:FETCh:EBWidth?
Description
Query the result of emission bandwidth measurement.
Explanation
This command is only available when the emission bandwidth measurement is enabled.
This command will select data from the latest measurement results and transmit the data to the output
buffer.
Return Format
The query returns the emission bandwidth in integer and the unit is Hz.
Example
The query below returns 50000.
:FETCh:EBWidth?

Rigol DSA832E Specifications

General

Brand	Rigol
Model	DSA832E
Category	Measuring Instruments
Language	English