Rigol DSA832E

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-65
:HCOPy Subsystem
Command List:
 :HCOPy:ABORt
 :HCOPy:IMAGe:COLor[:STATe]
 :HCOPy:IMAGe:FTYPe
 :HCOPy:IMAGe:INVert
 :HCOPy:IMAGe:PTIMe
 :HCOPy:IMAGe:QUALity
 :HCOPy[:IMMediate]
 :HCOPy:PAGE:ORIentation
 :HCOPy:PAGE:PRINts
 :HCOPy:PAGE:SIZE
 :HCOPy:RESume
:HCOPy:ABORt
Syntax
:HCOPy:ABORt
Description
Cancel the current print operation.
:HCOPy:IMAGe:COLor[:STATe]
Syntax
:HCOPy:IMAGe:COLor[:STATe] OFF|ON|0|1
:HCOPy:IMAGe:COLor[:STATe]?
Description
Set the print color to gray or color.
Query the print color.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Explanation
OFF|0: gray
ON|1: color
Return Format
The query returns 0 or 1.
Example
The command below sets the print color to gray.
:HCOPy:IMAGe:COLor:STATe OFF or :HCOPy:IMAGe:COLor:STATe 0
The query below returns 0.
:HCOPy:IMAGe:COLor:STATe?