EasyManua.ls Logo

Rigol DSA832E

Rigol DSA832E
243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-83
:MMEMory:STORe:CORRection
Syntax
:MMEMory:STORe:CORRection ANTenna|CABLe|OTHer|USER,<file_name>
Description
Save the amplitude correction data file with the specified filename (.cbl or .csv).
Parameter
Name
Type
Range
Default
--
Keyword
ANTenna|CABLe|OTHer|USER
--
<file_name>
ASCII String
--
--
Explanation
<file_name> should contain the path and the filename.
You can save the amplitude correction file in the D disk or E disk. The .csv format file can only be stored in
the E disk.
If the specified file already exists, it will be overwritten.
Example
The command below store the amplitude correction file to the D disk with the filename ANT.cbl.
:MMEMory:STORe:CORRection ANT,D:\Corr1:ANT.cbl
:MMEMory:STORe:LIMit
Syntax
:MMEMory:STORe:LIMit <file_name>
Description
Save the limit line currently edited with the specified filename (.lim).
Parameter
Name
Type
Range
Default
<file_name>
ASCII String
--
--
Explanation
<file_name> should contain the path and the filename.
You can save the limit file in the D disk or E disk.
If the specified file already exists, it will be overwritten.
Example
The command below stores the limit line currently edited in the D disk with the filename low.liml.
:MMEMory:STORe:LIMit D:\Limit0:low.lim

Table of Contents

Other manuals for Rigol DSA832E

Related product manuals