Rigol DSA832E - IO Configuration; Configuring Remote Interfaces (LAN, USB, GPIB)

RIGOL Chapter 2 Command System
2-142 DSA800E Programming Guide
[:SENSe]:SWEep:COUNt:CURRent?
Syntax
[:SENSe]:SWEep:COUNt:CURRent?
Description
Query the number of sweeps that have been finished in single sweep.
Explanation
The [:SENSe]:SWEep:COUNt? command queries the number of sweeps to be executed in a single sweep.
While, this command queries the number of sweeps that have been finished in single sweep.
Return Format
The query returns the number in integer
[:SENSe]:SWEep:POINts
Syntax
[:SENSe]:SWEep:POINts <number of points>
[:SENSe]:SWEep:POINts?
Description
Set the sweep points.
Query the sweep points.
Parameter
Name
Type
Range
Default
<number of points>
Integer
101 to 3001
601
Return Format
The query returns the sweep points in integer.
Example
The command below sets the sweep points to 650.
:SENSe:SWEep:POINts 650
The query below returns 650.
:SENSe:SWEep:POINts?