Rigol DSA832E - [:Sense]:Vswr:reset; [:Sense]:Vswr:state

Chapter 2 Command System RIGOL
DSA800E Programming Guide 2-151
[:SENSe]:VSWR:RESet
Syntax
[:SENSe]:VSWR:RESet
Description
Restore the parameters of the VSWR measurement to their initial states.
[:SENSe]:VSWR:STATe
Syntax
[:SENSe]:VSWR:STATe OFF|ON|0|1
[:SENSe]:VSWR:STATe?
Description
Enable or disable the VSWR measurement.
Query the status of the VSWR measurement.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 0 or 1.
Example
The command below enables the VSWR measurement.
:SENSe:VSWR:STATe ON or :SENSe:VSWR:STATe 1
The query below returns 1.
:SENSe:VSWR:STATe?