Rigol DSA832E

RIGOL Chapter 2 Command System
2-6 DSA800E Programming Guide
:CALCulate:LLINe:FAIL:RATIo?
Syntax
:CALCulate:LLINe:FAIL:RATIo?
Description
Query the fail ratio of the Pass/Fail test.
Return Format
The query returns the fail ratio in scientific notation.
Example
The query below returns 5.490000E+00.
:CALCulate:LLINe:FAIL:RATIo?
:CALCulate:LLINe:FAIL:STOP:STATe
Syntax
:CALCulate:LLINe:FAIL:STOP:STATe OFF|ON|0|1
:CALCulate:LLINe:FAIL:STOP:STATe?
Description
Set whether to stop the test if the test fails.
Query whether to stop the test if the test fails.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
ON|1
Explanation
If the parameter is set to ON or 1, the test stops when the test fails and the test continues if the parameter
is set to OFF or 0.
Return Format
The query returns 0 or 1.
Example
The command below sets the instrument to stop the test when the test fails.
:CALCulate:LLINe:FAIL:STOP:STATe ON or :CALCulate:LLINe:FAIL:STOP:STATe 1
The query below returns 1.
:CALCulate:LLINe:FAIL:STOP:STATe?