Rigol DSA832E Programming Guide

RIGOL Chapter 2 Command System
2-180 DSA800E Programming Guide
Return Format
The query returns the number of averages of the trace in integer.
Example
The command below sets the number of averages to 200.
:TRACe:AVERage:COUNt 200
The query below returns 200.
:TRACe:AVERage:COUNt?
:TRACe:AVERage:COUNt:CURRent?
Syntax
:TRACe:AVERage:COUNt:CURRent?
Description
Query the number of averages currently executed of the trace.
Return Format
The query returns the number of averages currently executed of the trace in integer.
:TRACe:AVERage:RESet
Syntax
:TRACe:AVERage:RESet
Description
Execute the trace average reset operation.
Explanation
This command is valid when the trace type is set to "Video Avg" or "Power Avg".
:TRACe:CLEar:ALL
Syntax
:TRACe:CLEar:ALL
Description
Clear all the traces; namely set the type of all the traces to BLANK (Off).

Rigol DSA832E Specifications

General

Brand	Rigol
Model	DSA832E
Category	Measuring Instruments
Language	English