GX-6000 Operator’s Manual Replacing or Recharging the Batteries • 114
If using a DC powered charging station, plug the 12 VDC vehicle plug
adapter into a vehicle’s 12 VDC power socket.
Figure 20: Connecting the Charging Station’s DC Adapter
The construction of the charging stations allows them to be chained
together but a separate adapter must be used for each charging station.
One adapter will not operate more than one charging station.
4 . If necessary, remove the battery pack from the instrument as described in
Step 1 - Step 6 in “Replacing the Lithium Ion Battery Pack” on
page 108.
DC Adapter
To Vehicle
12 VDC
Power Socket
DC12V
DC Powered Charging Station
Power Supply
Jack (on
bottom of
charger)
To Next Page
Loading...
Need help?
General
