RKI Instruments GX-6000 - Page 154

145 • Using Maintenance Mode GX-6000 Operator’s Manual
3 . The screen that appears will depend on the setting of User Mode’s
PASSWORD item.
If User Mode’s
PASSWORD is set to OFF (factory setting), continue
with Step 4.
If User Mode’s
PASSWORD is set to ON, continue with Step 6.
4 . If User Mode’s
PASSWORD has been set to OFF, the Mode Select
screen will appear, prompting you to choose the mode you’d like to
enter.
5 . Use the ▲AIR and SHIFT ▼ (PANIC) buttons to put the cursor in front
of MAINTENANCE and press and release the POWER/ENTER button.
A password screen will appear. Continue to Step 7.
6 . If User Mode’s
PASSWORD has been set to ON, a password screen will
appear.
PASSWORD
MODE SELECT
USER MODE
MAINTENANCE
PASSWORD
INPUT
PASSWORD
0 0 0 0
User PASSWORD OFF User PASSWORD ON User PASSWORD ON
Maint
. PASSWORD ON Maint. PASSWORD ON Maint. PASSWORD OFF
or OFF
4:07
INPUT
PASSWORD
- - - -
ENTER FOR
MAINTENANCE MODE