103
Playing Arpeggios
The Styles you create are temporary; they are deleted as soon as you
turn off the power or select some other Style. You can store 128
arpeggio styles in the User memory.
1.
Confirm that the current arpeggio style is the one you want
to save.
2.
Display the Arpeggio Style Edit screen (p. 102) or the
Arpeggio Step Rec screen (p. 100).
3.
Press [SHIFT] so it lights, and then press .
The Arpeggio Style Name screen will appear.
fig.11-010b
4.
Assign a name to the arpeggio style.
For details on assigning names, refer to
“Assigning a Name”
(p. 39)
5.
When you have finished inputting the name, press [ENTER].
A screen will appear, allowing you to select the write-
destination.
fig.11-011
6.
Press [ENTER].
A message will ask you for confirmation.
fig.11-012
7.
Press [ENTER] to execute the save operation.
* To cancel the operation, press [EXIT].
Never switch off the Fantom-XR while data is being saved.
Arpeggio Styles are not part of a patch or performance; they are
handled as separate data. This means that an arpeggio style can
be used with more than one patch or performance.
An arpeggiated phrase generated by the Fantom-XR can be recorded
on an external sequencer. To do this, you will normally leave the
settings as shown in the connection example on p. 29, and make the
following settings only while recording the arpeggiated phrase.
Settings on the Fantom-XR
•
USB-MIDI Thru:
OFF
•
Tx Note:
ON
In the Patch Mode
Settings on your external MIDI keyboard
• Set the transmit channel to match the receive channel of the
Fantom-XR’s “Patch Mode Rx Ch” (p. 156).
Settings on your external sequencer
• Set the receive channel to match the receive channel of the
Fantom-XR’s “Patch Mode Rx Ch.” Turn OFF settings that are
labeled “MIDI Thru” or “Thru.”
• Turn OFF settings that are labeled “MIDI Thru” or “Thru.”
In the Performance Mode
Settings on your external MIDI keyboard
• Set the transmit channel to match the receive channel of the
Fantom-XR’s “Arpeggio Channel” (p. 100).
Settings on your external sequencer
• Set the receive channel to match the receive channel of the
Fantom-XR’s “Arpeggio Channel.”
• Turn OFF settings that are labeled “MIDI Thru” or “Thru.”
* When you’ve finished recording the arpeggio and want to resume
conventional recording, restore the above settings to their original
state.
Saving the Styles You Have
Created (Write)
Recording arpeggios on
your external sequencer
Fantom-XR_r_e.book 103 ページ ２００６年４月４日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
