145
Adding Effects
For each of the three multi-effects, the chorus, and the reverb, you
can specify whether it will operate according to the effect settings of
the performance, or according to the effect settings of the patch or
rhythm set assigned to the part you specify.
1.
From the Effect Edit Menu screen, turn the VALUE dial or
use [INC][DEC] to select “SOURCE.”
fig.22-015
2.
Press the VALUE dial or [ENTER].
The Effect Source screen will appear.
fig.22-016
3.
Use or to select the parameter.
4.
Turn the VALUE dial or use [INC][DEC] to get the value you
want.
5.
When you’ve finished editing, press [EXIT] to return to the
previous screen.
MFX-1–3 Source (Multi-Effects 1–3 Source)
Selects the multi-effects parameter settings that will be used by the
performance. If you wish to use the performance settings, select
“PRF.” If you wish to use the settings of the patch/rhythm set
assigned to one of the parts, select the part number.
Value:
PRF, P1–P16
Chorus Source
Selects the chorus parameter settings that will be used by the
performance. If you wish to use the performance settings, select
“PRF.” If you wish to use the settings of the patch/rhythm set
assigned to one of the parts, select the part number.
Value:
PRF, P1–P16
Reverb Source
Selects the reverb parameter settings that will be used by the
performance. If you wish to use the performance settings, select
“PRF.” If you wish to use the settings of the patch/rhythm set
assigned to one of the parts, select the part number.
Value:
PRF, P1–P16
Specifying the Effect Source
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set’s multi-effects settings are
selected, those settings are shown in each of the performance’s
multi-effects setting screens, and the settings can be then be
changed as well. Changes to patch or rhythm set multi-effects
parameter settings are lost when another patch or rhythm set is
selected. To keep the modified settings, save the patch/rhythm
set settings (p. 69, p. 83).
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set’s chorus settings are selected,
those settings are shown in each of the performance’s chorus
setting screens, and the settings can be then be changed as well.
Changes to patch or rhythm set chorus parameter settings are
lost when another patch or rhythm set is selected. To keep the
modified settings, save the patch/rhythm set settings (p. 69, p.
83).
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set’s reverb settings are selected,
those settings are shown in each of the performance’s reverb
setting screens, and the settings can be then be changed as well.
Changes to patch or rhythm set reverb parameter settings are
lost when another patch or rhythm set is selected. To keep the
modified settings, save the patch/rhythm set settings (p. 69, p.
83).
Fantom-XR_r_e.book 145 ページ ２００６年４月４日 火曜日 午前１０時１４分
To Next Page
Loading...
