Roland Fantom XR - Voice Pitch Shifter

210
Effects List
59: TELEPHONE
fig.MFX-59
60: PHONOGRAPH
Simulates a sound recorded on an analog record and played back on a
record player. This effect also simulates the various types of noise that are
typical of a record, and even the rotational irregularities of an old turntable.
fig.MFX-60
61: PITCH SHIFTER
(Feedback Pitch Shifter)
A stereo pitch shifter.
fig.MFX-61
62: 2VOI PCH SHIFTER
(2VOICE PITCH SHIFTER)
Shifts the pitch of the original sound. This 2-voice pitch shifter has
two pitch shifters, and can add two pitch shifted sounds to the
original sound.
fig.MFX-62
Parameter
Value Description
Voice
Quality #
0–15 Audio quality of the telephone voice
Treble -15– +15 dB Bandwidth of the telephone voice
Balance # D100:0–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
Parameter
Value Description
Signal
Distortion
0–127 Depth of distortion
Frequency
Range
0–127 Frequency response of the playback system
Decreasing this value will produce the
impression of an old system with a poor
frequency response.
Disc Type LP, EP, SP Rotational speed of the turntable
This will affect the frequency of the
scratch noise.
Scratch Noise
Level
0–127 Amount of noise due to scratches on the
record
Dust Noise
Level
0–127 Volume of noise due to dust on the record
Hiss Noise
Level
0–127 Volume of continuous “hiss”
Total Noise
Level #
0–127 Volume of overall noise
Wow 0–127 Depth of long-cycle rotational irregularity
Flutter 0–127 Depth of short-cycle rotational irregularity
Random 0–127 Depth of indefinite-cycle rotational irregu-
larity
Total Wow/
Flutter #
0–127 Depth of overall rotational irregularity
Balance # D100:0W–
D0:100W
Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Telephone
Telephone
L in
R in
Phonograph
Phonograph
L out
R out
Balance W
Balance W
Balance D
Balance D
L in
R in
Pitch Shifter
Pitch Shifter
L out
R out
2-Band EQ
2-Band EQ
Parameter
Value Description
Coarse #1 -24– +12 semi Adjusts the pitch of the pitch
shifted sound in semitone steps.
Fine #1 -100– +100 cent Adjusts the pitch of the pitch
shifted sound in 2-cent steps.
Delay Time 0–1300 ms, note Adjusts the delay time from the
direct sound until the pitch
shifted sound is heard.
Feedback # -98– +98 % Adjusts the proportion of the
pitch shifted sound that is fed
back into the effect. Negative (-)
settings will invert the phase.
Low Gain -15– +15 dB Gain of the low range
High Gain -15– +15 dB Gain of the high range
Balance # D100:0W–D0:100W Volume balance between the di-
rect sound (D) and the pitch
shifted sound (W)
Level 0–127 Output Level
Parameter
Value Description
Pitch 1:
Coarse #1
-24-+12 semi Adjusts the pitch of Pitch Shift 1
in semitone steps.
Pitch 1:Fine #1 -100-+100 cent Adjusts the pitch of Pitch Shift
Pitch 1 in 2-cent steps.
Pitch 1:Delay 0–1300 ms, note Adjusts the delay time from the
direct sound until the Pitch Shift
1 sound is heard.
Pitch 1:Feedback
#
-98– +98 % Adjusts the proportion of the
pitch shifted sound that is fed
back into the effect. Negative (-)
settings will invert the phase.
Pitch 1:Pan # L64-63R Stereo location of the Pitch Shift
1 sound
Pitch 1:Level 0–127 Volume of the Pitch Shift1
sound
Pitch 2:
Coarse #2
-24-+12 semi Settings of the Pitch Shift 2
sound.
The parameters are the same as
for the Pitch Shift 1 sound.
Pitch 2:Fine #2 -100-+100 cent
Pitch 2:Delay 0–1300 ms, note
Pitch 2:Feedback
#
-98– +98 %
Pitch 2:Pan # L64-63R
Pitch 2:Level 0–127
Low Gain -15– +15 dB Gain of the low range
High Gain -15– +15 dB Gain of the high range
Level Balance A100:0B-A0:100B Volume balance between the
Pitch Shift 1 and Pitch Shift 2
sounds
Balance D100:0W-D0:100W Volume balance between the di-
rect sound (D) and the pitch
shifted sound (W)
Level 0-127 Output Level
L in
R in
L out
R out
2Voice Pitch Shifter
Level 1
Balance W
Balance D
Balance W
Balance D
Level 1
Pan 2 R
Pan 1 L
Pan 1 R
Pan 2 L
Fantom-XR_r_e.book 210 ページ ２００６年４月４日 火曜日 午前１０時１４分