108
Playing Rhythms
1.
Access the Rhythm Switch screen.
* In Performance mode, access the Arp/Chd/Rhy Switch screen and use
or to select “Rhythm.”
2.
Press [SHIFT] so it lights, and then press .
Or, press [ENTER].
The Rhythm Group screen will appear.
fig.11-005
Another way to access the Rhythm Group screen is to press
[MENU] to access the Rhythm Menu screen (in Performance
mode, the Arp/Chd/Rhy Menu screen), then choose “Rhythm
Group” and press [ENTER].
3.
Press or to move the cursor to the Rhythm group.
fig.13-006.e
While this screen is displayed, you can press [SHIFT] so it
lights, then press to view a list of the rhythm groups.
4.
Turn the VALUE dial or use [INC][DEC] to select the rhythm
group.
Value:
P01–32 (Preset), U01–32 (User)
You can press [GROUP] to switch between User and Preset
memories.
5.
If an external MIDI keyboard is connected, you can play
your keyboard to audition the rhythm pattern assigned to
each note.
fig.13-007.e
You can also audition the rhythm patterns using just the
Fantom-XR, without using any external equipment. Move the
cursor to “Note” and turn the VALUE dial or use [INC][DEC] to
select a note; then press the OUTPUT knob to audition the
rhythm pattern assigned to that note.
The rhythm pattern assigned to each note is displayed below
Note. If you want to change the rhythm pattern, refer to
“Selecting Rhythm Patterns”
(p. 110).
6.
When you have made the setting, press [EXIT].
For more on the prepared rhythm group already programmed
in the Fantom-XR, refer to
“Rhythm Group List”
(p. 243)
This sets the Rhythm group tempo.
1.
In the Rhythm Group screen, use or to move the
cursor to “Tempo.”
2.
Turn the VALUE dial or use [INC][DEC] to change the
tempo.
Value:
5–300
fig.13-008.e
* Editing the Tempo setting will change the System setting “Tempo” (p.
156). The tempo setting cannot be saved in the Rhythm Group.
Select the Rhythm Group
Determining the Tempo for Rhythm
Group
These operate in tandem with the keys on your keyboard.
Tempo
Fantom-XR_r_e.book 108 ページ ２００６年４月４日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
