87
Playing in Performance Mode
The following Part parameters can be edited from the Performance
Mixer screen:
• Level (p. 88)
• Pan (p. 88)
• Chorus Send Level (p. 89)
• Reverb Send Level (p. 89)
1.
In the Performance Mixer screen, use or to select
the parameter.
fig.08-013
2.
Turn the VALUE dial or use [INC][DEC] to set the value.
Level:
Level
Pan:
Pan
Chorus:
Chorus Send Level
Reverb:
Reverb Send Level
For details on using the Arpeggio and Rhythm functions, refer to
“Playing Arpeggios”
(p. 97),”
and
“Playing Rhythms”
(p. 107).
In Performance mode, the reception status of MIDI messages that
control various things can be viewed for each part. This is useful
when you want to check whether the sound generator is responding
correctly to the operations from an external MIDI controller.
1.
Access the Performance Play screen (p. 84).
2.
Press [MENU].
The Top Menu screen will appear.
3.
Turn VALUE dial or press [INC][DEC] to select “Part
Information.”
4.
Press [ENTER].
The Part Information screen will appear.
fig.08-018
5.
Use or to select the message that you want to
check.
Mod:
Modulation messages
Breath:
Breath messages
Foot Type:
Foot type messages
Volume:
Volume messages
Panpot:
Panpot messages
Expression:
Expression messages
Hold 1:
Hold 1 messages
Pitch Bend:
Pitch Bend messages
Aftertouch:
Aftertouch messages
Voices:
Voice messages (The number of voices used)
6.
Use or to select the part.
The parameter values for the selected part are displayed.
fig.08-019
7.
Press [EXIT] to close the screen.
Editing the Part Settings
Performing with the
Arpeggio/Rhythm function
Viewing MIDI Messages for
Each Part (Part Information)
Fantom-XR_r_e.book 87 ページ ２００６年４月４日 火曜日 午前１０時１４分
To Next Page
Loading...
Need help?
General
