RTS ODIN - Management Port; Debug Shell

138 Menu System Description ODIN Intercom Matrix
Setup PIN Field
The Setup PIN field is used to enter a numeric PIN used to access the Intercom Setup menu.
This field can contain up to 20 digits.
Config PIN Field
The Config PIN field is used to enter a numeric PIN used to access the Configuration menu.
This field can contain up to 20 digits.
Management Port
Allow AZedit Check Box
The Allow AZedit check box determines whether AZedit connections are allowed via the Management Port.
Debug Shell
Access Field
The Access field is used to grant access to the debug shell and enable serial telnet on ODIN.
Telnet is available on the Control Port only.
Available options are Enabled and Disabled.
FIGURE 72. Configuration | Authentication | Management Port
FIGURE 73. Configuration | Authentication | Debug Shell