RTS ODIN - Iso; FIGURE 96. Intercom Setup | Resources | ISO

ODIN Intercom Matrix Menu System Description 157
ISO
The ISO (Isolate) screen is used to configure settings for ISOs in the intercom system.
ISO Field
The ISO field is used to select the ISO to be configured.
Output Field
The Output field is used to enter the port number of the port to isolate when the ISO key is pressed.
ISO Self Check Box
The ISO Self check box determines whether the ISO caller is isolated (as well as the target) so both ends only hear each other.
When the ISO key is released, normal intercom operation is automatically restored.
Scroll Enable Check Box
The Scroll Enable check box determines whether the current ISO is visible in the local scroll list.
Latch Disable Check Box
The Latch Disable check box determines whether the ISO, when assigned to a key, causes the key to become latch disabled. This
can be overridden by clearing the latch disable for the key after the assignment is made.
FIGURE 96. Intercom Setup | Resources | ISO