SATO E series Service Manual

PN 9001098
Rev. A
7-1
SATO M-10e TT/DT Printers Service Manual
Factory Resets
7.1 Overview
The Factory Reset Mode allows you to:
• Factory Settings/Test Print
• Clear Head Counters
• Clear Cutter Counter
• Clear EEPROM
Section
7
DSW2-4
LINE KEY
FEED KEY
DIRECTION
KEYS
ENTER
KEY

SATO E series Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Max. Print Speed	6 ips (inches per second)
Max. Print Width	4.09 inches (104 mm)
Interfaces	USB, Ethernet
Media Type	Labels, Tags, Ticket
Ribbon Length	Up to 984 ft (300 m)
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi