EasyManuals Logo

SATO E series Service Manual

SATO E series
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #147 background imageLoading...
Page #147 background image
PN 9001098
Rev. A
8-11
SATO M-10e TT/DT Printers Service Manual
Section 8. Troubleshooting
Windows 95/98 Peer-to-Peer Troubleshooting
If you are having trouble printing with Windows 95 Peer-to-Peer network, check the following:
1. If the print server does not show up under HP JetAdmin on a Windows 95/98 Peer-to-Peer
network, try removing all of the Windows 95 network software from the Network Control
panel and then reinstalling them as follows:
First install the IPX/SPX-Compatible Protocol, the Client for Microsoft Networks, and the
network adapter card driver.
Restart the system, and then add the HP JetAdmin service.
2. Because of the many changes that have been incorporated in Windows 95.98 Peer-to-Peer
printing since its introduction, it is a good idea to upgrade to the latest version of JetAdmin,
(available on the HP web site at http://www.hp.com).

Table of Contents

Other manuals for SATO E series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO E series and is the answer not in the manual?

SATO E series Specifications

General IconGeneral
Print MethodThermal Transfer / Direct Thermal
Max. Print Speed6 ips (inches per second)
Max. Print Width4.09 inches (104 mm)
InterfacesUSB, Ethernet
Media TypeLabels, Tags, Ticket
Ribbon LengthUp to 984 ft (300 m)
Power SupplyAC 100-240V, 50/60 Hz
Print Resolution203 dpi

Related product manuals