Diagnostics and Troubleshooting CDHD
230 User Manual
FLT # Fault Message (click description for m ore info)
FLT 78 Bus AC Supply Line Disconnect
FLT 80 AqB Commutation Fault
FLT 82 SensAR Encoder Fault
FLT 83 Regen Resistor Overload
FLT 85 Motor Plate Read Failed
FLT 86 SAVE and Power Cycle Required
FLT 87 Excessive PE Value
FLT 88 CAN is in Bus-Off State
FLT 89 Realtime Overload Fault
FLT 90 Secondary Feedback Position Mism atch
FLT 91 EtherCAT Packet Loss
FLT 92 CAN/ EtherCAT State Not Operational
FLT 93 Fieldbus Version Mismatch
FLT 94 ESI Version Mismatch
FLT 95 Cust om Absolute Encoder Operational Fault
FLT 96 Digital Out put Over- Current Fault
FLT 98 Power Brake Fault
FLT 99 Sankyo Absolut e Encoder Fault
FLT 100 Unstable Current Loop
FLT 102 BiSS-C Encoder Indicates an Internal Fault
FLT 103 HI PERFACE Dat a Error.
FLT 104 High IQ Current Detected
FLT 105 Digital Output Over-Current Fault
FLT 106 Feedback Type Auto- Detect Failed
FLT 107 EnDat Excessive Resolution Fault
FLT 108 MOTORNAME/ MTP Dat a Mism atch
FLT 109 Firm ware Version is Not Supported by this Drive
FLT 110 ESI Vendor Mismatch
FLT 111 MENCZPOS Mismatch with Halls
To Next Page
