139
99
Connections and Communications with External EquipmentConnections and Communications with External Equipment
1
3
5
2
4
6
7
8
12
14
13
9
10
11
7. Set the delimiter in accordance
(1) Select [Delimiter], and then press [ OK].
(2) Select the type of delimiter required, and then press [ OK].
CR Carriage return (ASCII code ODH)
LF Carriage return line feed (ASCII code OAH)
CR+LF Carriage return & carriage return
Comma “,” (ASCII code 2CH)
Tab (Unit
Attached)
Unit symbol attached when there is a direct Windows
connection compatible with AU
Tab (No unit) Numbers only when there is a direct Windows connection
compatible with AU
Enter (Unit
Attached)
Unit symbol attached when there is a direct Windows
connection compatible with AU
Enter (No unit) Numbers only when there is a direct Windows connection
compatible with AU
What is a Delimiter?
The symbol to separate each item of data and each command.
8. Return to the weight measurement mode
Press [ POWER].
To Next Page
Loading...
Need help?
General
