111
1
3
5
2
4
6
7
8
12
14
13
9
10
11
77 ApplicationsApplications
Preparing Samples in Accordance with Recipes
(Recipe preparation) (W-AD/ W Series only)
It is possible to call out pre-registered recipes in order to prepare samples in accordance with the
recipe with the W-AD/ W series. This is very useful for compounding medicines.
Preparing for Recipe preparation
1. Set the Recipe preparation
(1) Press [ MENU] while in the weight
measurement mode, and then press [ LEFT].
(2) Select [
Select Mode], and then press [ OK].
(3) Select [
Recipe preparation
], and then press
[ OK].
2. Select the recipe
Select any of the recipes from [RECIPE1-5] (or the
recipe name), and then press [ OK].
3. Set the Recipe name
(1) Select [Recipe name], and then press [ OK].
(2) Enter the recipe name, and then press [ OK].
^ [Entering Numerals and Characters] (P.43)
4. Set taring
(1) Select [Taring], and then press [ OK].
(2) Select [Auto] or [Manual], and then press [ OK].
Taring Setting
If [Automatic] is selected, taring will be carried out
automatically when the next sample is placed in
the pan after the recipe preparation when sample
weighing has been completed. If [Manual] is selected,
taring needs to be carried out manually for each
sample preparation.
*
To Next Page
Loading...
Need help?
General
