87
1
3
5
2
4
6
7
8
12
14
13
9
10
11
66 SettingsSettings
Deleting the Contents of the Built-in Memory
It is possible to delete all weighing values and records of calibration stored on the balance. Once they
have been deleted, they cannot be recovered.
1. Call out the Save memory Settings
(1) Press [ MENU] while in the weight measurement mode, and then press [ LEFT].
(2) Select [
System settings], and then press [ OK].
(3) Select [Save memory Settings], and then press [ OK].
Delete the records stored in the built-in memory
(1) Select [Delete internal memory], and then press
[ OK].
(2) Enter the password, and then press [ OK].
A message stating that the built-in memory will be
erased, and the screen will return to the selection
screen once this task has been completed.
Default Password
The default password is set at [9999] when the balance is shipped from the factory.
Prohibitions
Precaution when deleting the internal memory
Do not switch off the power supply when [Please wait] is displayed. Failure to observe this will result in the data in the memory
not being deleted correctly, and will lead to malfunctions.
*
To Next Page
Loading...
Need help?
General
