106
77 ApplicationsApplications
Measuring Large Quantities of Fine Samples
(Add-on mode)
A useful function for formulating large quantities of fine samples. This function is used with a printer or
personal computer connected.
The weight of each sample will be measured, output and added together, and the total sum will be
output when formulation has been completed.
Measuring with the Add-on mode
1. Set the Add-on mode
(1) Press [ MENU] while in the weight
measurement mode, and then press [ LEFT].
(2) Select [
Select Mode], and then press [ OK].
(3) Select [ Add-on mode], and then press
[ OK].
Set the element number output and total sum
output.
^ [Element Number Output (Add-on mode)]
(P.107 )
^ [Total Sum Output (Add-on mode)] (P.107 )
(4) Place the container on the pan, and press
[ O/T] when the
stabilization mark is displayed.
Taring will be performed.
(5) Press [ OK].
The [Add-on mode Ready] status will be activated.
2. Measure the sample
(1) Place the sample in the container.
The weighing value of the sample (element) will be
output when the load has stabilized, recorded and
taring will be carried out automatically.
3. Repeat Step 2 for the required number of samples
4. Press [ PRINT] when formulation is complete
The total sum of the weighing values measured will
be displayed and output. Press [ OK] to return the
display to the [Add-on mode Ready] status.
To Next Page
Loading...
Need help?
General
