69
1
3
5
2
4
6
7
8
12
14
13
9
10
11
66 SettingsSettings
5. Enter the mass number
(1) Select [Mass number], and then press [ OK].
(2) Enter the mass number within a maximum of eight
digits, and then press [ OK].
6. Return to the weight measurement mode
Press [ POWER]
Menu Settings
Returning to the Default Settings (Menu reset)
Reset the menus when you lose track of the settings through excessive operations. This will return the
settings to the default settings.
An asterisk (*) will be displayed on the [Menu Map] when the settings have been returned to the default
settings. ^ [Menu Map] (P.167)
When the Log-in Function is Set at ON
Items without update authority will not be reset by logged in users. The items that will not be
reset regardless of whether the log-in function is set at ON or OFF are as follows: [Certain
standard weight input values], [Language setting].
1. Call out the System settings
(1) Press [ MENU] while in the weight measurement mode, and then press [ LEFT].
(2) Select [ System settings], and then press [ OK].
(3) Select [System settings], and then press [ OK].
2. Menu reset
(1) Select [Menu reset (Password)], and then press
[ OK].
(2) Enter the password, and then press [ OK].
^ [Entering Numerals and Characters] (P.43)
^ [Changing User Passwords] (P.77)
Password Types
The password of the logged in user is required when
the log-in function is set at ON, and the password of
the administrator is required when it is set at OFF.
When no Password has been Set
The [Menu reset] confirmation screen will be
displayed. Press [ ON] to reset the menu.
The menu settings will be returned to the default settings, and the screen will return to the
weight measurement mode.
Default Password
The default password is set at [9999] when the balance is shipped from the factory.
*
*
*
*
To Next Page
Loading...
Need help?
General
