To Next Page

To Previous Page

66 SettingsSettings



Calling Recently-Used Menus (Menu History)

It is possible to swiftly call out menus that have been recently used.

1. Call our the menu history

(1) Press [ MENU] while in the weight

measurement mode, and then press [ LEFT].

(2) Select [ Menu History], and then press

[ OK].

The menu history menu will be displayed.

2. Select a function from the menu history

Select a function from the menu history, and then

press [ OK].

Foreword3
Manual4
Safety Precautions5
Precautions on Use5
X84; Precautions Related to Usage5
X84; Precautions Related to Place of Installation5
X84; Precautions Related to Installation Work6
X84; Precautions Related to Work/Operations6
X84; Risks Involved in Repairs/Dismantling/Modifications7
X84; Precautions Related to Inspections/Maintenance8
X84; Measures to be Observed During Emergencies8
X84; Measures to be Observed During Power Outages8
X84; Caution Labels9
X84; Residual Risk Information9
Aftercare Services and Part Supply Period13
Inspections and Maintenance13
Product Disposal13
Table of Contents14
Setup16
AP Series16
Inspecting the Contents of the Package17
Deciding on an Installation Environment18
Parts Attachment (W-AD Series)18
Pan Area Configuration and Weighing Performance (W-AD Series)20
Attaching the Parts (Semi-Micro Models)21
Attaching the Parts (Semi-Micro Models)22
Adjusting the Horizontal Level of the Balance25
Turning on the Power26
Component Names and Functions28
Main Unit28
X84; Main Unit Front, Top and Side Panels28
X84; Main Unit Rear Panel29
Display and Icons30
Display Panel30
X84; Display Examples When Measuring Weight30
Measurement Keys + Application Function Operation Keys31
X84; Display Icons When Setting up Menus32
Basic Operations33
Measurements (Standard Measurement Mode)33
Ending Measurements34
W-AD Series Functions (Standard Measurement Mode)35
X84; Measuring Using the Automatic Door Function (Position Memory Function)35
X84; Measuring Using the Touchless Sensor (IR Sensor Touchless Function)36
X84; Adjustable Windbreak Plate Usage37
(Semi-Micro Models Only)37
How to Use Menus38
X84; Menu Configurations38
X84; Selecting Menus39
X84; Screens When Setting up Menus39
X84; Setting up and Amending the Measurement Mode40
Switching between Displays41
X84; Switching between Minimum Number of Displayed Digits (1D/10D Display)41
X84; Switch Measurement Range (Only AP125WD-AD, AP225WD-AD, AP125WD, AP225WD)41
X84; Unit Change41
X84; Displaying Tare/Net/Gross42
X84; Switching between Decimal Points (.), Periods (.) and Commas (,)42
Entering Numerals and Characters43
X84; Input Conventions43
X84; Entering the Numerals and Characters Displayed43
Calibration44
CAL Key Setting44
Adjustment and Tests with Internal Weights (W-AD/ W/ X Series Only)46
Adjustment and Tests with External Weights47
Adjustment of Internal Weight (W-AD/ W/ X Series Only)48
Saving Records of Calibration50
X84; Record of Calibration Printing Samples50
Perfect Self Calibration (PSC) Settings (W-AD/ W/ X Series Only)50
Time-Specified Adjustment (Timer CAL) Settings (W-AD/ W/ X Series Only)52
Periodic Inspections (W-AD/ W/ X Series Only)53
X84; Periodic Inspection Settings53
X84; Performing Periodic Inspections55
Settings58
Taring Settings58
X84; Zero Tracking Function58
X84; Amending the Zero and Tare Timing Function59
X84; Auto Zero Function60
X84; Auto Tare Function61
Adjusting Stability and Response62
X84; Activating the Filling Function62
X84; Smart Stability and Response Settings63
X84; Adjusting the Stability Mark64
Unit Settings66
X84; Unit Setting66
Menu Settings69
X84; Returning to the Default Settings (Menu Reset)69
X84; Preventing Amendments to Menu Settings (Menu Lock)70
X84; Printing the Menu Setting Status71
X84; Calling Recently-Used Menus (Menu History)72
Log-In Function73
X84; Log-In Function ON/OFF73
X84; User Management (User Name Changes, Function Restrictions, Etc.)74
X84; Logging in at Start up76
X84; Changing User Passwords77
Balance Settings78
X84; Screen Saver Function78
X84; Display Settings in the Operation Mode78
X84; Balance ID Settings79
X84; Date/Time Settings80
X84; Output Style Settings80
X84; Brightness Settings81
X84; Sound Settings81
X84; Language Settings82
X84; Manual Trigger (Manual Start) Configuration (W-AD Series Only)82
Touchless Sensor Configuration Methods (W-AD Series Only)82
X84; Switching Touchless Sensor Operation Methods83
Balance Built-In Memory Contents86
X84; Viewing Weighing Values and Records of Calibration86
X84; Deleting the Contents of the Built-In Memory87
Applications88
Application Function Mode88
X84; Application Function Mode88
X84; Measuring Part Quantities (Piece Counting Measurement)89
X84; Measuring Percentages (Percent Measurement)92
X84; Measuring Averages (Averaging Mode)95
X84; Solid Specific Gravity, Liquid Density Calculation Formulas97
X84; Measuring the Specific Gravity of Solids (Solid Specific Gravity)99
X84; Measuring Liquid Density (Liquid Density)103
X84; Measuring Large Quantities of Fine Samples (Add-On Mode)106
X84; Measuring Formulas (Formulation Mode)108
X84; Preparing Samples in Accordance with Recipes (Recipe Preparation) (W-AD/ W Series Only)111
X84; Buffer Solution Preparation (Preparing Buffer Solutions) (W-AD/ W Series Only)114
X84; Sample Preparation for Analysis (Sample Preparation) (W-AD/ W Series Only)115
Performing Statistical Calculation (Statistical Calculation)117
Comparator Function118
X84; Comparator Function118
X84; Target Measurement Mode118
X84; Pass/Fail Evaluation Mode120
Minimum Weighing Value Mode122
X84; Calculating the Minimum Weighing Value During Actual Measurement122
X84; Setting a Random Value for the Minimum Weighing Value123
Ionizer (STABLO-AP Standard Equippment: W-AD Series · Option: W/ X Series)124
Connecting the Ionizer (Excluding W-AD Series)124
Turning on the Power to the Ionizer126
Removing Static Electricity127
Changing Ion Irradiation Time127
Connections and Communications with External Equipment128
Connecting External Equipment128
X84; Connecting Printers128
X84; Connecting Personal Computers129
X84; Connecting PLC and Other Serial Communications Equipment131
X84; Cable Connections (RS232C)132
X84; Data Formats132
X84; List of Commands133
Communication Settings137
X84; Standard Settings137
X84; User Settings138
X84; Serial Communication Function Troubleshooting140
Useful Output Functions141
X84; Automatic Printing/Output (Auto-Print)141
X84; Intermittent Printing/Output (Interval Timer Function)143
X84; Output Timing Settings144
X84; GLP Output Function145
X84; Setting the Details to Print146
Connecting USB Devices (W-AD/ W Series Only)147
X84; Connection Method147
X84; Saving Weighing Values, Calibration Records and Weighing Screens on USB Memories (W-AD/ W Series Only)148
X84; Operating the Balance with a USB Keyboard150
X84; Transferring Data to the Balance with the Use of USB Barcode Readers151
Errors and Recovery152
Troubleshooting152
Error Messages153
Maintenance154
Maintaining the Balance154
Ionizer (Included as Standard with the W-AD Series) Maintenance155
X84; Removing the Glass Draft Shield156
X84; Precautions When Moving the Balance or Shipping the Balance for Repair157
Inspection158
X84; Daily Inspections158
X84; Periodic Inspections159
About Weights160
X84; Types of Weight and Their Selection160
X84; JCSS Weight Calibrations160
Specifications161
Maintenance Parts164
X84; List of Maintenance Parts164
X84; List of Special Accessories (Options)164
Technical Documentation165
Electronic Balance Inspection Methods165
X84; Classes and Tolerance165
Menu Map167
X84; Using the Menu Map167

Brand	Shimadzu
Model	AP W-AD Series
Category	Laboratory Equipment
Language	English

Shimadzu AP W-AD Series User Manual

Table of Contents

Questions and Answers:

Shimadzu AP W-AD Series Specifications

Related product manuals