112
77 ApplicationsApplications
5. Register the ingredients
(1) Select any of the ingredients from [Component
1-10] (or ingredient name), and then press [
OK], and select [Setting] then press [ OK].
(2) Enter the ingredient name within 20 characters,
and then press [ OK].
(3) Select the unit, and then press [ OK].
(4) Enter the weight, and then press [ OK].
(5) Enter the permissible error value, and then press
[ OK].
^ [Entering Numerals and Characters] (P.43)
Preparing for unit registration
Pre-Unit setting enables them to be selected in
Step 3.
^ [Unit Settings] (P.66)
If the unit of each component is not unified.
Units of the total value is “g (gram)”.
[Permissible Error Value] is...
The [Permissible Error Value] entered in Step 5
represents the value for which an OK judgment is
permitted with regard to the range of ingredient
weight for each ingredient.
6. Repeat Step 5 for the required number of samples
7. Return to the weight measurement mode
Press [ POWER].
*
*
*
To Next Page
Loading...
