SICK DL100 User Manual

Operating instructions Distance measuring device DL100 – CANopen®
Electrical connection
36 © SICK AG • Subject to change without notice • 8015416/ZPN2/2017-09-08
7 Electrical connection
7.1 Safety
Wrong supply voltage
ATTENTION!
Device damage from wrong supply voltage!
Incorrect supply voltage may cause damage to the device.
Therefore:
• Only operate the distance measuring device with a
protected low voltage and secure electrical insulation
of protection class III.
Work under voltage
ATTENTION!
Device damage or unintended operation by work under
voltage!
Working under voltage may cause unintended operation.
Therefore:
• Only perform wiring work in the powered down condi-
tion.
• Line connections must only be established and discon-
nectedwiththesupplyvoltageswitchedo.
7.2 Wiring notes
ATTENTION!
Fault from improper wiring!
Improper wiring may cause malfunctions in operation.
Therefore:
• Only use shielded cables with twisted pair wires.
• Observe wiring notes.

SICK DL100 Specifications

General

Brand	SICK
Model	DL100
Category	Measuring Instruments
Language	English