SICK DL100 User Manual

Operating instructions Distance measuring device DL100 – CANopen®
Operation via Ethernet (Ethernet interface)
62 © SICK AG • Subject to change without notice • 8015416/ZPN2/2017-09-08
9.2.4 Diagnostic data
Field Description
Device state Display device status: ready for operation, warning(s) active,
error active, laser activated, MF1 active and MF2 active
Read/Write access
• Read only
Device warning Display of current warnings: Laser, temperature, level and
plausibility
Read/Write access
• Read only
Device error Display of current errors: Laser, temperature, level and plausi-
bility
Read/Write access
• Read only
Level Display of the current reception level (damping value)
Read/Write access
• Read only
Temperature Display of current internal device temperature
Read/Write access
• Read only
Unit
• °C
Operating hours Display of current operating hours
Read/Write access
• Read only
Unit
• h
Table 32: Page “Diagnostic data”

SICK DL100 Specifications

General

Brand	SICK
Model	DL100
Category	Measuring Instruments
Language	English