SICK DL100

8015416/ZPN2/2017-09-08 • © SICK AG • Subject to change without notice 71
Operating instructions Distance measuring device DL100 – CANopen®
Operation via Ethernet (Ethernet interface)
9.2.6 Methods
Field Description
Device reboot • Click the button "Reboot" to cause the device to restart.
Read/Write access
• Write only
Laser control Switchthelaseronandoasfollows:
• Use the selection button to select the desired option.
• Click the button to perform the option.
Read/Write access
• Write only
Input value
• 0:o/1:on
Factory setting
• O
Heating control Control the heating as follows:
• Use the selection button to select the desired option.
• Click the button to perform the option.
Read/Write access
• Write only
Input value
• 0:O/1:On/2:Auto
Factory setting
• Auto
Table 47: Page "Methods"