SICK DL100

Operating instructions Distance measuring device DL100 – CANopen®
Operation at the measuring device
46 © SICK AG • Subject to change without notice • 8015416/ZPN2/2017-09-08
Menu “CANopn”
(continued)
Parameter Description
ResSpd Choose resolution for the output value "Speed" via the digital
datainterface.Theparameterdoesnotinuencethemea-
surement value displayed.
• 0.1
• 1.0
• 10.0
• 100.0
• ModeDef
Factory setting
• 1 mm/s
Note: ModDef = Module Dened → See page 105,
chapter 10.11.4.
Table 12: Menu “CANopn”
8.5.5 Menu „more“
Use the menu "More" to activate and deactivate the expanded menu view.
You can get to the menu "More" via the menu path:
Main menu →
→ Menu → → CANopn → → more
Push the
-key. The currently set option is displayed here.
Options Description
Yes /
No
Activate and deactivate expanded menu view.
Options
• Yes
• No
Factory setting
• No
Table 13: Menu "More"