SICK microScan3 - EFI-pro - Page 156

microScan3 Core – EFI-pro microScan3 Pro – EFI-pro
Ambient operating tempera‐
t
ure
–10 °C to 50 °C
Storage temperature –25 °C to 70 °C
Air humidity ≤ 95%, non-condensing
2)
Height above sea level during
operation
≤ 2300 m
Vibration resistance
3)
Standards IEC 60068-2-6
IE
C 61496-1, clause 4.3.3.1 and 5.4.4.1
IEC 61496-3, clause 5.4.4.1
Frequency range 10 Hz to 150 Hz
Amplitude 0.35 mm (10 Hz to 60 Hz), 5 g (60 Hz to 150 Hz)
Shock resistance
3)
Standards IEC 60068-2-27
IE
C 61496-3, clause 5.4.4.4.2 and clause 5.4.4.4.3
Single shock 15 g, 11 ms
Continuous shock 10 g, 16 ms
EMC In accordance with IEC 61496-1, IEC 61000-6-2, and
IE
C 61000-6-4
1)
The specified enclosure rating is only valid if the safety laser scanner is closed, the system plug and the
co
ver plate are mounted, and all of the safety laser scanner’s M12 plug connectors are closed using a
male cable connector suitable for the enclosure rating or using a protective cap.
2)
IEC 61496-1, no. 4.3.1 and no. 5.4.2, IEC 61496-3, no. 4.3.1 and no. 5.4.2. Condensation has an influ‐
ence on normal operation.
3)
In direct mounting.
Miscellaneous data
T
able 36: Miscellaneous data
microScan3 Core – EFI-pro microScan3 Pro – EFI-pro
Wavelength 845 nm
Detectable reflectance factor 1.8% to several 1,000%
Maximum uniform contami‐
na
tion of the optics cover
without reducing the detec‐
tion capability
1)
30%
Area where detection capabil‐
ity is restricted
≤ 50 mm
2)
Light spot diameter
At front screen 18 mm
At 4.0 m distance 12 mm
At 5.5 m distance 20 mm
At 9.0 m distance 30 mm
Divergence of collimated
be
am
0.17°
Receiving angle 0.75°
Pulse duration Typ. 4 ns
Average output power 9.2 mW
Laser class 1M
13 TECHNICAL DATA
156
O P E R A T I N G I N S T R U C T I O N S | microScan3 – EFI-pro 8021913/15ZW/2019-11-14 | SICK
Subject to change without notice