SICK S300 Series User Manual

b
S
witch off the voltage supply for the device for at least 2 seconds and then switch
it back on.
Or:
b
Restart the device using the CDS.
10.4 Advanced diagnostics
The supplied CDS (Configuration & Diagnostic Software) contains extended diagnostic
op
tions. The CDS enables you to isolate the problem if the error situation is unclear or
there are availability issues.
For detailed information, see the online help of the CDS (Configuration & Diagnostic
Software).
TROUBLESHOOTING 10
8010948/ZA21/2020-06-18 | SICK O P E R A T I N G I N S T R U C T I O N S | S300
119
Subject to change without notice

SICK S300 Series Specifications

General

Scanning angle	270 °
Number of monitoring cases	4
Protection class	IP65
Number of scanning planes	1
Angular resolution	0.5°
Interface	RS-422, Ethernet
Supply voltage	24 V DC
Ambient operating temperature	0 °C ... +50 °C
Laser class	1 (IEC 60825-1)
Storage temperature	–25 °C ... +70 °C
Protective field range	0.1 m to 3 m