SICK S300 Series User Manual

To protect the protective device against inadvertent adjustment or manipulation, you
mus
t use the contour of the surroundings as a reference for the safety laser scanner.
Further topics
•
"Using the contour as a reference", page 92
4.3.6.1 Minimum distance
Overview
F
or hazardous point protection, a minimum distance must be maintained between the
protective field and the hazardous point. This minimum distance ensures that the haz‐
ardous point can only be reached once the dangerous state of the machine has been
stopped completely.
S
1
Figure 33: Minimum distance to hazardous area
1
Contours as reference
4 PROJECT PLANNING
44
O P E R A T I N G I N S T R U C T I O N S | S300 8010948/ZA21/2020-06-18 | SICK
Subject to change without notice

SICK S300 Series Specifications

General

Scanning angle	270 °
Number of monitoring cases	4
Protection class	IP65
Number of scanning planes	1
Angular resolution	0.5°
Interface	RS-422, Ethernet
Supply voltage	24 V DC
Ambient operating temperature	0 °C ... +50 °C
Laser class	1 (IEC 60825-1)
Storage temperature	–25 °C ... +70 °C
Protective field range	0.1 m to 3 m