SICK S300 Series User Manual

Area of responsibility Target group Specific chapters of these operating instruc‐
t
ions
1)
Manufacturer Project developers
(planners, developers,
designers)
"Project planning", page 27
"Configuration", page 73
"Technical data", page 121
"Accessories", page 138
Installers "Mounting", page 58
Electricians "Electrical installation", page 64
Safety experts "Project planning", page 27
"C
onfiguration", page 73
"Commissioning", page 103
"Technical data", page 121
"Checklist for initial commissioning and com‐
missioning", page 148
Operating entity Operators "Troubleshooting", page 113
Maintenance person‐
ne
l
"Maintenance", page 107
"Troubleshooting", page 113
"Accessories", page 138
1)
Chapters not listed here are intended for all target groups. All target groups must follow all of the safety
and warning instructions in all chapters of the operating instructions!
In other applications, the operating organization is also the manufacturer of the equip‐
ment w
ith the corresponding allocation of the target groups.
1.4 Further information
www.sick.com
T
he following information is available via the Internet:
•
This document in other languages
•
Data sheets and application examples
•
CAD files and dimensional drawings
•
Certificates (such as the EU declaration of conformity)
•
Guide for Safe Machinery. Six steps to a safe machine
•
CDS (Configuration & Diagnostic Software)
1.5 Symbols and document conventions
The following symbols and conventions are used in this document:
Safety notes and other notes
DANGER
Indicates a situation presenting imminent danger, which will lead to death or serious
injuries if not prevented.
WARNING
Indic
ates a situation presenting possible danger, which may lead to death or serious
injuries if not prevented.
CAUTION
Indic
ates a situation presenting possible danger, which may lead to moderate or minor
injuries if not prevented.
1 ABOUT THIS DOCUMENT
8
O P E R A T I N G I N S T R U C T I O N S | S300 8010948/ZA21/2020-06-18 | SICK
Subject to change without notice

SICK S300 Series Specifications

General

Scanning angle	270 °
Number of monitoring cases	4
Protection class	IP65
Number of scanning planes	1
Angular resolution	0.5°
Interface	RS-422, Ethernet
Supply voltage	24 V DC
Ambient operating temperature	0 °C ... +50 °C
Laser class	1 (IEC 60825-1)
Storage temperature	–25 °C ... +70 °C
Protective field range	0.1 m to 3 m